NOTICE

The performance characteristics of our products described in this catalog are only examples of measurements and not guaranteed.

In case of use of our products beyond the operating conditions given in this catalog, suitability must be finally determined by the user, even though examples of test results or data obtained under similar operating conditions are provided by AGC ENGINEERING.

Our material is only for reference, and such application is subject to the user's own judgment and responsibility.

Warranty And Limited Warranty Terms And Conditions
AGC ENGINEERING Co.,Ltd. warrants all of its products to be free from defects in materials and workmanship for a period of one year after date of delivery provided the use, installation, application, maintenance, and storage of the products are in accordance with the specifications and description in the instruction manuals and catalogs provided by AGC ENGINEERING.

Under this warranty, the obligation or compensation of AGC ENGINEERING for any defect is only limited to repair or replacement of the defective product at the discretion of AGC ENGINEERING, the defective product is returned unaltered to AGC ENGINEERING, and the defect can be verified by AGC ENGINEERING.
Any claim shall be presented to, and processed by AGC ENGINEERING's established claim procedure.

AGC ENGINEERING reserves the right to discontinue manufacturing any products, or to change materials, design, and specifications without prior notice.

Except for the above warranty, AGC ENGINEERING makes no warranties written, expressed or implied.

Warning To System Designer And End User
In order to prevent danger or injury resulting from improper applications of our products, the system designer and end user must read and understand the following precautions before designing, installing, and using the system into which our products are being incorporated.

All our products must be designed, installed, and used to comply with the specifications and the description in the instruction manuals and catalogs.

The system designer and end user must read and understand the warnings described in the instruction manual shipped along with our product.

The system designer is under an obligation to provide information on our products and warnings to the end user, which help the end user thoroughly understand how to use our products in safe conditions.

Under certain circumstance, the normal operation of a device is prevented by improper use, malfunction, or the device's life span.
Regarding application, intended use, designing a system, installing, and operation, taking the fact into consideration, those who handle our products should provide an adequate safeguard for the security of life and property even in the event of malfunction or deterioration of product fluid.

In the instruction manual of the system, the system designer should provide all the end users with a warning that malfunction is still possible even if the system is carefully designed.

Under no circumstances, should our products be used for life support devices, vehicle control devices, aircraft, or other devices which may cause serious damage to the security of life and property.

Before attempting to connect, disconnect, replace or repair our product, all system lines supplying fluid or energy to our products must be shut off or removed.

Repair is subject to the procedures previously recommended by AGC ENGINEERING.

Our products are designed for industrial systems.
Regarding nonindustrial applications, and other applications beyond AGC ENGINEERING specifications with regard to temperature, pressure, flow rate, and fluid, please consult your distributor.